Site frame (brochures with an area statement)
Why a site frame?
Most brochure layouts carry more than the layout: an area statement table, logos, RERA details or notes, often filling a third of the image. Without a frame the studio treats the whole image as the site, so the plan sits in one corner of the published map and the 3D ground is mostly empty board.
The Site frame tells the studio which part of the image is the site. The 2D plan, the published map, the View in 3D model and the satellite 3D view are all centred on it.
Set the frame
- Open Master Plan Studio → Design → Site frame (the first section).
- Fastest: press Auto-fit layout. The frame wraps every mapped plot and area with a small margin.
- To adjust by hand press Set frame (or Adjust frame). Drag the frame to move it and the round handles to resize it.
- Fit to mapped layout — same as Auto-fit.
- Whole image — goes back to the full image.
- The green dashed box shows your mapped plots and areas. If part of it falls outside the frame you will see a warning: those plots would be cut off.
- Press Use this frame, then Save design.
What changes after you save
- The published map is re-framed straight away: visitors see the layout filling the screen, and the area statement is hidden even when they zoom out.
- View in 3D and the 3D satellite view are built on the frame, so the ground fits the site.
- Press Apply to site map again if you use the studio design as the plan image, so the image matches.
- Everything you placed — roads you drew, amenities, text, road edits and saved camera views — stays in the same place on the plan.
Good to know
- The frame never changes your plots, inventory or the image in Site map studio — you can still map anywhere on the full image.
- If you use Align the master plan itself for the satellite 3D view, re-align it after changing the frame.
- Want the area statement on your plan? Turn on Design → Legend & area statement; the studio draws a clean one for you.
- Set the frame before you design roads and amenities, and before aligning the 3D model on the satellite map.
- You need permission to edit site maps to change the frame.
Related: Master Plan Studio · Save, apply & export · 3D on the satellite map