3D master plan on the satellite map
What it is
The 3D master plan on the satellite map places your Master Plan Studio 3D model on the real satellite view, at its true position and size. Plots show live availability colours, with buildings, amenities and landscape around them. Visitors switch between the flat Layout and 3D Satellite with one tap.
Before you start
- The site map is published. Saving a Master Plan Studio design is recommended; without one the default look is used.
- The project's Location map uses Satellite view with highlights.
- Ideally the layout image is already aligned on the map — then the 3D plan can reuse its corners.
Turn it on — step by step
- Open the project's Location map page and scroll to 3D master plan on the satellite map (or in Master Plan Studio use Export → Show 3D on satellite map…).
- Switch it On.
- What to show: pick the Site map, then choose Buildings & amenities, Landscape, Studio ground (roads, lawns) with its opacity (off shows the real satellite photo between plots), Plot numbers, Open in availability colours, Plot details on tap and Live motion.
- Placement & orientation — choose one:
- Same corners as the layout image — reuses the corners you aligned above. Quickest.
- Same corners as an extra overlay — when another overlay shows this site map.
- Align the master plan itself — most exact. Press Align plan on map, drag the plan's own image into place, press Apply & save.
- Press Preview on map. Compare with Layout: if the 3D plan is turned or mirrored, fix it with Turn the plan (0°/90°/180°/270°) and Mirror.
- Visitors & camera: choose what the map Opens on (Layout image loads fastest), whether to Hide image overlays under the plan, the Tilt, and Facing (Plan top up, North up or Custom).
- Press Save 3D settings. Visitors only see the 3D view after you save with the switch on.
What visitors see
- A switch at the top of the location map: Layout | 3D Satellite. The 3D view loads only when they pick it.
- An Availability / Design colour switch, Turn left / Turn right, Top view / Tilted view, and pause / play for live motion.
- Tapping a plot shows its number, status, area, facing and price (only the fields your display settings allow).
Fixing common problems
- Choose a published site map to show in 3D — publish the site map first.
- The layout image has no corners yet — align the layout image above, or pick another placement.
- Align the master plan on the map first — with Align the master plan itself, press Align plan on map and place all four corners.
- Plan is offset or the wrong size — the layout image corners are off; re-align them, or use Align the master plan itself.
- Plan sits in a corner with empty ground — your brochure has an area statement or logos beside the layout. Set a Site frame in Master Plan Studio and save. If you use your own plan alignment, align it again afterwards.
- Slow on phones — keep Opens on: Layout image and turn off Live motion.
Related: Location map & satellite overlay · Master Plan Studio · Site frame · View in 3D