Visitor navigation (multi-map)
What it's for
On a multi-map project buyers do not see one plan but a set of connected plans. This article explains how they move around the public map — where they land, how they reach a tower or floor, and how to share a link to one particular plan — so you can set up the project the way buyers will use it and explain it on sales calls.
Before you start
- The project is Multi map, Publicly accessible, and has more than one Published map.
- The overview plan has link hotspots to the other plans, and maps are assigned to sections in the section tree.
Where visitors land
- The project link (
/l/company/project) opens the overview: the published map that has link hotspots.
- If no published map has link hotspots, it opens the most recently published map.
- The map view (zoom and position) resets when they switch to another plan, and stays put while they filter.
Three ways to move between plans
Link hotspots
Tapping a coloured hotspot on the overview (a tower, block or phase) opens the linked plan. Hotspots are tinted by the availability on their target plan and dim when filters leave nothing there. Hotspots pointing to unpublished plans are dimmed and cannot be tapped.
Map switcher
A row of buttons lists every published map, with the section name when one is assigned. The overview comes first, then maps in section order.
Project sections dialog
The sections button opens the section tree — overview, then towers, floors and other sections, with the published maps under each — so buyers can jump straight to "Tower B → Floor 7".
Share a specific plan
- The project link is the best link to share: buyers start at the overview and can explore everything.
- Copy public link in Map Studio copies the project link for multi-map projects, not the single plan.
- To send a buyer straight to one plan, open the public map, switch to that plan and copy the browser address (it ends in
/maps/…). The embed works the same way with /e/ instead of /l/.
Sales layout
The sales layout uses the same hotspots, switcher and order, so your team can walk a buyer through the project exactly as the buyer will see it at home.
Check your setup
- Open the project link in a private browser window.
- Confirm you land on the overview.
- Tap every hotspot; each should open the right plan. A dimmed hotspot means its target is not published.
- Open the switcher and the sections dialog and check names and order. Reorder sections on the Multi map structure tab if needed.
Tips and common questions
- Visitors land on a floor plan, not the overview — the overview has no link hotspots or is not published.
- A plan is missing from the switcher — it is a draft or archived.
- Name maps clearly ("Tower A — Floor 3"); buyers see the names.
Related: Multi layout projects · Link maps · Share links & embed · Public map overview