Unit labels & list
What it's for
Every unit shape carries a label: the unit number that links it to inventory. The unit list in the Unit tool's panel feeds those labels to your shapes in order. Getting the list right — exact numbers, the right separators, unique identifiers for repeated numbers — is what makes every plot light up on the public map without fixing links later.
Before you start
- You need permission to edit site maps on the project.
- Know your inventory unit numbers. The safest source is the
unit_number column of an inventory export (and unique_identifier when numbers repeat).
Enter the unit list
- In Map Studio choose Unit mapping (U).
- Type or paste the numbers into the list, one unit per line, in the order you will draw them.
- Check Up next: it shows the number the next closed shape will receive. Numbers that already have a shape are skipped.
- Draw. Each closed shape takes the next number.
How a paste is read
| You paste | Result |
| Several lines | Each line is one unit (safest) |
A line 101 | Tower A in a multi-line list | Unit 101 with unique identifier "Tower A" |
| Two columns copied from a spreadsheet (separated by a tab), several rows | Unit number and unique identifier |
One line with commas or semicolons: 1, 2, 3 | Three units |
One line with slashes, backslashes or pipes: 12/13/14 | Three units |
One line with quotes: "Plot 1, Block A", "Plot 2, Block A" | Two units, commas inside the quotes kept |
Watch out: a single line 101 | Tower A on its own is split into two units, "101" and "Tower A". Put unique identifiers on a multi-line list, or set them on the shape afterwards.
Label rules
- Matching is not case-sensitive (
a-101 links to A-101), but spaces inside the label count: Focus 01 does not match Focus01.
- Ampersand (&) is not allowed on the map. A unit called
Plot A&B in inventory cannot be mapped until you rename it (for example Plot A and B) in inventory too.
- A backslash in a label is turned into a forward slash. Keep inventory numbers with forward slashes so both sides match.
- Survey numbers are never used for matching — only the unit number and unique identifier.
Repeated unit numbers
When the same number appears more than once in a project (flat 101 in each tower), each inventory unit needs a unique identifier (for example "Tower A"), and the shape must carry the same value. Either write 101 | Tower A in the list, or select the shape and fill Unique identifier.
Change a label after drawing
- Choose Select (V) and click the shape.
- Edit the label or Unique identifier in the panel.
- Save. The shape relinks to the matching inventory unit.
Examples
| Label | Works? |
Plot 42 | Yes |
A-101 | Yes |
101 | Tower B (multi-line list) | Yes, with unique identifier |
Plot A & B | No — ampersand |
101, 102, 103 meant as one label | No — becomes three units; use quotes or one per line |
Tips and common questions
- Paste the whole column from your inventory export; the list order then matches the export order.
- To correct the number of a shape you already drew, select the shape and change its label.
- CAD imports clean labels for you: "Plot No. 12" becomes "12",
& becomes "and".
Related: Unit mapping · Matching inventory · Inventory basics