Split a plot (subdivide)
What it's for
Plots get divided: a buyer wants half of plot 12, or a large commercial plot is sold as three shops. Split unit (Subdivide) cuts one mapped unit into two or more sub-units on the map, gives each its own number and area, and can create their inventory records and retire the original — in one step, without redrawing by hand.
Before you start
- You need permission to edit site maps. To create or change inventory as part of the split you also need permission to manage inventory.
- Save your map first; the split saves the map with it.
- Decide the new numbers (for example 12A and 12B) and, if you know them, each part's area.
Split a unit
- In Map Studio choose Select (V) and click the unit.
- In the panel press Split unit (Subdivide). The split window opens on that plot.
- Under Split Configuration set the Number of Parts (at least 2) and the Cut Orientation: Vertical Cut or Horizontal Cut. Use Ratio Balance to make parts unequal.
- For angled or irregular plots, click a part and drag any point to move the boundary; drag the cut line handles to change its angle. Areas and percentages update as you move points. A reset button puts the points back to the automatic split.
- Under Sub-Unit Labels & Areas, check each new number (suggested as 12A, 12B, 12C…) and area. The Total Plot Area is shown for reference.
- Optional styling: Label Badge Styling (font size, rotation, text colour) and Bake dividing lines onto plan image with line colour, thickness, dashed style and Clip strictly to plot boundary. Baking draws the cut lines and new numbers into the plan image itself.
- Under Inventory Setup, tick Create new inventory records for sub-units and choose what happens to the original unit (see the table).
- Press Apply Split & Update Map.
What happens to the original unit
| Option | Result |
| Mark as Subdivided (Not Available) | The original stays in inventory, set to not available, with a note "Subdivided into 12A, 12B". Default. |
| Archive Parent Unit | Same note and status, then removed from the inventory list. |
| Keep Active | The original is left unchanged. |
| Delete Parent Unit | The original is deleted from inventory. |
What happens automatically
- The original shape is replaced by the new shapes, which link to inventory by their numbers.
- New inventory units copy the original's unit type and stage, take the map's section and the area you entered. Numbers that already exist in inventory are not duplicated; only their area is updated.
- A version backup "Split unit 12 into 12A, 12B" is saved, so you can restore the map if needed (versions & restore). Restoring the map does not undo inventory changes.
- If the plot had a design in Master Plan Studio, each sub-plot inherits it: use, architecture style, compound wall, storeys and design colour. A custom "text on plan" is not copied — each sub-plot shows its new number. Amenities, roads and text you placed stay where they are.
- If the map is published, buyers see the new plots after the map is saved.
Start from Master Plan Studio
In Master Plan Studio select the plot and press Split this plot…. Unsaved design changes are saved, the studio closes and the split window opens on that plot. Reopen the studio afterwards; if the design was applied as the plan image, press Apply to site map again so the image shows the new plots.
Tips and common questions
- Fill prices, facing and other details of the new units afterwards in inventory or by CSV.
- Choose Keep Active only if the original number is still sold as a whole elsewhere; otherwise buyers may see both.
- Baking lines into the plan is permanent in that image; keep a downloaded copy of the plan first if you might undo the split.
Related: Unit mapping · Edit the site map graphic · Inventory basics