Roads & centre lines
How roads are made
The studio fills the gaps between plot blocks with road automatically (Design → Roads → Auto-detect roads between plot blocks). Each road gets kerbs, footpaths, a centre line, zebra crossings at junctions, avenue trees and street lights. Road areas you mapped in Site map studio are always road, and their names and widths are printed on them.
Fix the road network
- A gap should be road but is lawn — use Paint road area (paint bucket at the bottom, or Design → Roads) and click around the gap. Plots are cut out automatically.
- Road where there should be none — click it and press Remove this road (open lawn), or use Mark no-road area.
- Roads too wide or too narrow detected — adjust Widest road and Smallest open space under Auto-detect.
- Road around the whole site — turn on Road around the outside and set Outer road width.
- A new road — choose Road at the bottom (or Footpath, Jogging track, Canal). Click to add points, double-click to finish. Start or end on another road and they join; hold Shift for 15° steps.
Correct a centre line by hand
Sometimes the centre line of a detected road is a little off — bent near a corner or not quite in the middle. You can move it without redrawing the road:
- Click the road. Blue points appear along its centre line.
- Drag a blue point to where the centre should be. The dashed centre line, street lights, avenue trees and the 3D view all follow.
- Double-click the line to add a point for a bend; Alt+click a point to remove it.
- In the Selection box, under Centre line position:
- Straighten keeps just the two end points — perfect for a straight road.
- Auto line goes back to the detected line.
Moving the centre line changes only the markings and roadside items. To change the road surface itself (shape or width) press Make editable (reshape, width, type): the road becomes a hand-drawn one with white handles.
Change how one road looks
Click a road to set its Name, Centre line (dashed, solid, double yellow or none), Edge lines, Zebra crossings, a Divider (median) with grass, shrubs, trees or lights, its own Road colour and street light spacing, or turn off its trees and lights. Reset this road undoes all of it.
To change many roads at once open Design → Bulk edit roads: pick roads with the chips (All, Auto-detected, Drawn, Wide, Narrow) or Ctrl-click them on the plan, then apply a setting to all of them.
The look of all roads
Design → Road look applies a ready-made style (surface, kerbs, footpaths and markings). Under Design → Roads you can fine-tune footpath width and surface, kerb corner radius, edge lines, road border, road colours, centre line style and zebra crossings.
Tips and common questions
- Road areas you map in Map Studio with the area type Road (and an optional road width) are always treated as road and printed with their name and width — the most reliable way to fix a main road.
- Road changes are part of the design: press Save design, and Apply to site map again if the design is your plan image.
- Ctrl+Z undoes road edits; Reset this road clears the changes on one road.
Related: Master Plan Studio · Area mapping · Save, apply & export