Import a CAD drawing (DXF or PDF)
What it's for
If your architect has the layout as a CAD drawing, you do not have to trace every plot by hand. The Auto-detect plots tab on Add site map reads a DXF file, or a PDF exported from CAD, finds the plot outlines and plot numbers, and creates a site map with every plot already drawn, numbered and linked to inventory. Plot areas are measured from the drawing when its units or scale are known.
It also works, less exactly, on a plain plan picture (JPG, PNG or WebP) when you switch on picture detection.
| Source | Plots found | Areas |
| DXF | Yes | Exact, from the drawing units |
| PDF exported from CAD | Yes, check the preview | After the scale is confirmed |
| Scanned or image-only PDF | No: use Map by hand | No |
| Plan picture (opt-in) | Yes, traced from outlines and colours | No |
Before you start
- You need permission to edit site maps on the project.
- The file must be an ASCII DXF (any AutoCAD version) or a PDF. DWG is not supported — open it in CAD and use Save As → DXF. Binary DXF is also refused.
- Maximum file size is 30 MB for DXF and PDF, 25 MB for a picture (your administrator may set a different limit).
- Multi-map projects: create the section in the structure tree first so you can assign the new map to it.
Prepare the drawing (share this with your architect)
- Draw the layout in Model space. Content that exists only on a paper-space layout tab is not read.
- Put plot outlines on one layer (for example
PLOTS), each plot a closed polyline.
- Write the plot number inside each plot, ideally on its own layer (for example
PLOT_NO). "Plot No. 12" and "12" both work.
- Set the drawing units (
UNITS → insertion scale Meters or Feet) so plot areas come out right.
- Keep roads, parks, open space, amenities, dimensions and the title block on separate layers.
- Purge the drawing and remove hatching to keep the file small, then save as DXF.
If only a PDF is possible: export it from CAD (do not scan a printout), tick Include layer information in the export options, print at a fixed scale such as 1:500 rather than "fit to page" (or keep the area statement table on the sheet), use a TrueType font such as Arial for plot numbers, and put one site plan per page.
Import a drawing
- Open the project's Site map studio and press Add site map.
- Enter the Map name and, on multi-map projects, the Section (optional).
- Open the Auto-detect plots tab and choose the file. It is read in your browser; nothing is uploaded yet. For a PDF with several pages, pick the Page with the site plan.
- Check the Layers table. Each layer has a guessed role you can change:
- Plot outlines — closed shapes on this layer become plots.
- Plot numbers — text on this layer labels the plots. If no layer has this role, text on all visible layers is used.
- Road, Park / garden, Open space, Lake / pond / canal, Amenity / building, Parking, Label only (zone outline) — closed shapes become area shapes of that kind.
- Show in picture only — drawn on the plan image, not converted.
- Hide — left out of the picture and the conversion (dimensions, hatching, title block). Layers that are off or frozen in CAD start as Hide.
- Check the Settings (see below), especially Drawing units for a DXF or Drawing scale for a PDF.
- Read the Preview and the Check before importing list. Zoom in where needed and search the plot list, which shows each plot's area in m², sq ft and sq yd.
- Press Import N plots & open editor. The plan is drawn as an image, the plots and areas are saved, and Map Studio opens with everything in place.
Don't need plots found for you? Skip detection — map by hand uses the drawing only as the background image.
Reading the preview
| Colour | Meaning |
| Green | Numbered plot, ready to import |
| Red | Duplicate number; later copies are renamed 12 (2), 12 (3) |
| Amber | Plot with no number |
| Grey dashed | Will be skipped |
| Blue dashed | Area (road, park and so on) |
| Red circle | A plot number that is not inside any closed plot |
Settings
- Drawing units (DXF) — Metres, Feet, Millimetres, Centimetres, Inches, Yards, Kilometres or Unknown (no areas). Read from the file when it says; otherwise guessed from typical plot sizes and marked "please confirm". Wrong units make areas wrong (metres versus feet is a factor of 10.76).
- Drawing scale 1 : N (PDF) — filled in from the sheet's area table when at least three plots agree, or from a printed scale such as "SCALE 1:500" (confirm it). You can type it, press Use 1:N when the table suggests a different scale, or enter one plot whose area you know and press Work out scale. Sheets marked "not to scale" get no scale, and plots import without areas.
- Map picture (PDF) — Original PDF look draws the page exactly as the PDF looks; Clean redraw (shown layers only) redraws only the lines and text that were read. Very dense sheets start on Clean redraw.
- Build plots from loose lines — joins separate line segments into plots. Turned on automatically when the plot layer is mostly open lines.
- Gap tolerance — Tight (clean drawings), Normal, or Loose (gappy line work) for how far apart line ends can be and still join.
- Only plot-number-like text — ignores area notes and dimensions such as "200 Sq.Yds".
- Remove "Plot No." prefix — "PLOT NO. 12" becomes "12" so it matches inventory unit numbers.
- Closed shapes without a number — Skip them (default; road strips often look like plots) or Import as N1, N2… to rename later.
Plan pictures (JPG, PNG, WebP)
- On the Auto-detect tab tick Detect plots in plan pictures (JPG, PNG, WebP), then choose the picture.
- Plots are found as enclosed patches of one colour. Adjust Colour match and Close gaps in outlines if plots merge or break up.
- Click inside a plot in the preview to remove it; click an empty spot to add the patch there as a plot.
- Optionally tick Also read plot numbers (text recognition). It reads some numbers; the rest import as N1, N2… for renaming.
A picture has no real-world scale, so these plots import without areas, and the picture itself is not stored.
What gets created
- A new Draft site map with the drawing rendered as the plan image (up to 4000 px on the long side, reduced to fit your plan-image limits).
- One unit shape per plot, labelled with its number. Shapes link to inventory units with the same unit number, exactly as for hand-drawn shapes. No inventory units are created; add them from the map when you publish or by CSV.
- Area shapes for layers given an area role, titled from the text inside them or the layer name (up to 500).
- A version entry "Imported from CAD drawing …" so you can restore later.
- The original DXF or PDF is kept privately. The site maps list shows Imported from CAD with the file name, which downloads the original for users who can edit maps.
Tips and common questions
- "This is not an ASCII DXF file" — it is a DWG, a binary DXF or a renamed file. Save As → DXF.
- No plots, everything grey — the wrong layer has the Plot outlines role, or the plots are loose lines: turn on Build plots from loose lines.
- Red circles — the outline has a gap or the number sits on the line. Try a looser gap tolerance or fix the drawing.
- PDF says it is a scanned image — there are no drawing lines to read. Use the Map by hand tab, which accepts PDFs up to 50 MB and turns the page into a PNG for tracing.
- PDF plots but no numbers — the numbers were exported as SHX line strokes. Import as N1, N2… and rename, or ask for the DXF.
- Keep the browser tab open while a dense PDF is drawn and imported; drawing pauses when the tab is in the background.
- Labels cannot contain
& or a backslash; they are changed to "and" and a slash automatically.
- Re-importing a revised drawing into an existing map is not supported; import it as a new site map.
Related: Upload a plan image · Unit mapping · Matching inventory · Area mapping