Properties and units
What it's for
A property is a building, park, estate or piece of land. A unit is what a tenant rents in it: a flat, a shop, a warehouse bay, a bed, a parking slot. Leases are made on units, and a unit's status always shows whether it can be let.
Before you start
- Permission Manage properties and units (Leasing Manager and Leasing Executive have it).
- To take units from a site map, the project must already have its units (inventory).
Add a property
- Go to Rentals & leasing → Properties and press Add property.
- Name: must be unique in your company.
- Kind: Residential, Commercial (shops, offices), Warehouse / logistics park, Industrial, Mixed use, Land, Storage / lockers, Co-living / hostel or Other. Residential and Co-living leases start with the residential tax rate and no tenant deduction; the others with the commercial rate and the deduction from Leasing settings.
- Area in: sq ft, sq m, sq yd, acre or hectare. Unit areas and rent per area use this unit.
- Address, City, Notes.
- Manager: the team member who looks after it. New maintenance requests are assigned to them, and they get lease-ending alerts.
- Project: link a project to take its units from the site map.
- Save. The property card shows Units, Leased, Vacant and Leases. The pencil icon edits it; switch off Active to retire it.
Add units one at a time
- On the property card press Unit.
- Unit: the code, for example A-101. It must be unique within the property.
- Kind: Flat / apartment, Villa / house, Room, Bed, Shop, Office, Warehouse bay, Cold storage, Industrial shed, Land parcel, Parking slot, Storage locker or Other. It starts from the property kind.
- Floor, Area and Asking rent / month. A new lease line fills the area and the asking rent from the unit.
Add many units at once
- On the property card press Many.
- Enter a Prefix (for example
A-), From number and To number. The dialog shows the codes it will make, for example "A-101 … A-120 · 20 units". Numbers are padded to the longer of the two (from 1 to 120 gives A-001 … A-120).
- Set the Kind, Floor, Area each and Asking rent / month shared by all of them, and press Add units.
Up to 500 units per run. Codes that already exist in the property are skipped, so running the same range again adds only the missing ones.
Take units from a project
- Edit the property and choose its Project. A From project button appears on the card.
- Press it, choose the Kind for the new units and press Take units.
Every unit of the project's inventory that is not yet a rental unit is added, with its unit number as the code and its area. Each inventory unit can be a rental unit only once (in any property), and a code already in the property is skipped. Asking rent is not copied: edit the units to add it. The message tells you how many were taken, or "Every unit of the project is already here."
Unit status
| Status | Meaning |
| Vacant | No lease uses it. The Lease button on the Units list starts a new lease on it. |
| Reserved | A draft lease uses it. |
| Leased | An active lease uses it. |
| On notice | Its lease is on notice. |
| Unavailable | Set by hand (repairs, own use). Not counted in occupancy. |
Status follows the leases by itself. Only Unavailable is set by hand: on the Units page press the pencil and switch on Unavailable (repairs, own use). A unit that is reserved, leased or on notice cannot be marked unavailable.
Tips and common questions
- "Unit A-101 already exists in …": codes are unique per property; the same code can exist in another property.
- Switching off Active on a unit removes it from the new-lease unit list without deleting its history.
- Units are never deleted, so old leases and reports keep their unit.
Related: Getting started · Create a lease